High rise prefab construction building metal steel warehouse

Steel structures are processed using high-quality materials, which are then welded and assembled into suitable structures according to the designed drawings. Moreover, because the steel itself is relatively heavy, it is necessary to use lifting methods during installation, so strict quality control is required during installation.

1. Before installation, we need to verify the product certificate, design drawings, and the structure of the acute assembly. Additionally, we need to double check whether the dimensions of the components are normal. When serious deformation and some defects are found during inspection, which prevent normal use in the future, they need to be dealt with and cannot be used in the future. Another thing is that when we install steel structures, we need a specialized standard and measurement method to inspect the components, and before welding, we need to conduct simulation experiments on the structure of the product.

2. The next step is to officially lift the components and other components, then measure the axis and label accurate data. Also, when welding, it is necessary to check whether there are any poor welding conditions at the welding joints. Also, the steel frame required for temporary support needs to be further tightened and installed to ensure stability.

Steel structure buildings will accumulate dirt after welding installation and rain corrosion on the surface, and many of these dirt are acidic substances. Therefore, for special areas with severe dirt, cleaning is necessary. When cleaning stubborn stains, a steel wiping magnetic therapy shot blasting machine is needed.

When cleaning, it is necessary to use electrical appliances to control the conveyor roller to transport the steel material to the cleaning machine. The steel material itself may receive impact and friction from different angles, and after friction, some of the oxide skin on the surface can be peeled off. At this time, the cleaned surface will be smoother compared to before. After treatment, the steel structure will come out of the other end of the cleaning equipment roller and be used.