Prefab chicken house steel structure poultry building

With the improvement of construction technology, prefabricated chicken coop steel structure poultry building construction gradually replaces concrete construction. In order to improve the quality of steel structure construction, the construction of steel structures has been expanded.

1、 Structural analysis and engineering judgment. Contemporary architecture has changed traditional structural analysis methods through the structural analysis technology of computer software systems, improving the efficiency of analysis work and the high accuracy of analysis data. However, we should be aware that due to the many unexpected situations that may occur in actual construction and the complexity of its geology, it is necessary to combine corresponding manual field investigation results to analyze the software. Only in this way can structural analysis be operable.

2、 The characteristics of prefabricated chicken coops with steel structures for poultry. The material is relatively uniform; Light self weight; Good plasticity and toughness.

3、 The basis for structural layout. The design of the structure should be judged from both economic and physical perspectives: on the one hand, when using steel structures in the construction process, it is determined that their economic cost is relatively low and can be easily accepted by the owner; On the other hand; In order to improve the physical load-bearing capacity of steel structures and construction quality, it is necessary to strictly consider the system characteristics, load properties, and distribution in the structural layout. In general, if the mechanical model is clear and the stiffness is uniform, the influence range should be limited as much as possible to large loads and their moving loads, so that it can directly transmit the line to the foundation.

Under normal pressure, steel will not cause various fractures and damages due to overloading. To balance the overall stress of the building structure, steel can distribute the local forces inside the building, so that the results only increase the strain value.

Overall, the ability of steel to adapt to loads is relatively strong, because the plasticity and toughness of steel structures are good. This is especially true for buildings constructed with other materials under strong seismic action, which can maintain the good integrity of steel structures.